【Parameters】
| Model No. | ML20C-B |
| Input | |
| Rated voltage | 220-240V AC 50/60Hz |
| Input current | 0.13A Max |
| Surge capacity | <15A (100us alf-current) @230V AC |
| THD | 20W full output |
| @230V AC THD <15% | |
| PF | ≥0.95 @230V AC (full load) |
| Standby power | <0.5W |
| Efficiency | 84%Max@230V AC (full load) |
| Output | |
| Working mode | CC |
| Load type | LED |
| Start time | <1s (@230V AC full load) |
| Ripple current | ±5% (@230V AC, 100% load, LED load) |
| Flicker rate | Flicker-free in full dimming range (flicker rate <5%) |
| No load output voltage | 60V DC Max |
| Full output power | 20W (single output) |
| Output current/voltage | 300mA / 9-42V DC 350mA / 9-42V DC 400mA / 9-42V DC 450mA / 9-42V DC 500mA / 9-40V DC 550mA / 9-36V DC 600mA / 9-32V DC 650mA / 9-30V DC 700mA / 9-28V DC |
| Current accuracy | ±5% |
| Wireless module | |
| Protocol | Bluetooth |
| Module Frequency | 5.0/2.4GHz 250Kbps Transmission rate: 2Mbps Radiation power: +10dBm Receiver sensitivity: -94.5dBm@1Mbps |
| Transmitting range | >20m (same floor) |
| Abnormal protect | |
| Protection mode | Over-voltage protection No load protection Short circuit protection |
| Environment | |
| Working temp. | -25~45℃ |
| Storage temp. | -40℃~80℃, humidity: ≤85% (non-condense) |
| Tc | 85℃ |
| Certificate | |
| Comply to | CE |
| Environment | Comply RoHS 2.0, Reach |
| LVD standard | EN61347-1, EN61347-2-13 |
| Hi-pot test 3750VAC | |
| EMC standard | EN55015, EN61547, EN61000-3-2, EN61000-3-3 |
| Surge | L to N:1KV |
| IP rate | IP20 |
| Protection | Class II |
| Others | |
| Wiring | Press-in terminals input wire: 0.5-2.5mm2 Output wire: 0.5-1.5mm2 |
| Packing details | Paper box+outer carton (K=A) |
| N. weight | 109±5g |
| Lifetime | 5 years warranty @Ta 230V AC full load |
| Remark: | |
| All parameters are tested under 230V AC input environment temp. 25℃ | |
【Dimension】
【Structure】
【Wiring】
【Bluetooth Antenna Adjustment】
【Parameter curve】
【Lifetime Curve】
【Output current setting】
| Output current | S1 | S2 | S3 | S4 | Voltage range |
| 300mA | - | - | - | - | 9-42V |
| 350mA | - | - | - | ON | 9-42V |
| 400mA | - | - | ON | - | 9-42V |
| 450mA | - | - | ON | ON | 9-42V |
| 500mA | - | ON | ON | - | 9-40V |
| 550mA | - | ON | ON | ON | 9-36V |
| 600mA | ON | - | ON | ON | 9-32V |
| 650mA | ON | ON | ON | - | 9-30V |
| 700mA | ON | ON | ON | ON | 9-28V |
【Initialization】
The LED light of the power supply load is in the breathing state for the first time power on, and the product enters the distribution network state
【Initialization】
Output current:300mA
【Application Notice】
1) When the LED lamp is connected to the LED driver, it is not allowed to disconnect and connect the LED lamp and the LED driver, otherwise, the LED lamp may be damaged.
2) When using this product, please use it according to the specifications. Failure may occur if it is used beyond the conditions of use of this product.
3) When using this product for networking, the same floor must be equipped with at least one gateway (horizontal transmission communication > 20 meters). If the same gateway is used on different floors, the communication is prone to abnormal situations such as code loss.
4)The Bluetooth module is assembled on the output side cover, which can be adjusted from 0-90 degrees for better communication.
